Blanketing and Low Pressure Regulators
Fluid Controls can supply a complete range of Blanketing and Low Pressure Regulators from Jordan Valve. The Mark 608 Series of gas pressure regulators is ideal valve for low pressure gas regulation. These self-contained low pressure gas regulators are for use on tank blanketing, gas meter inlet pressure regulating, gas burners and other low pressure air and gas applications.
Mark 608 Series Gas Pressure Regulators
The Mark 608 Gas Pressure Regulator is used on large tank blanketing applications or other low pressure gas regulation. In a tank blanketing application, the Mark 608 is used to control the flow of the blanketing gas into the tank to maintain the proper positive pressure. Once the blanket has been established, a small flow of nitrogen is continually admitted to the tank to keep the blanket fresh.
The Mark 608 comes standard with an extra large diaphragm to give set-point control as low as 2.0″ w.c. (4,98 mbar). The “S” pattern body design allows for high-flow capacity and also gives the option of having bubble tight shutoff. Completely self-operated, the Mark 608 does not require an external power source required. Soft elastomer plug provides ANSI Class VI shutoff and an extra large diaphragm offers greater sensitivity and accuracy.
Mark 608BP, Mark 608IS and Mark 608DS
The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The self-contained low pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners and other low pressure air and gas applications.
The Mark 608IS Gas Pressure Regulator is the ideal valve for low pressure gas regulation. The self-contained low pressure gas regulator is for use on tank blanketing, gas meter inlet pressure regulating, gas burners and other low pressure air and gas applications.
The Mark 608DS is a double-seated, self-operated gas regulator for use in tank blanketing applications. The double seated design allows the Mark 608DS to handle increased flow and higher pressure drops than similarly sized single seat valve types while maintaining ANSI Class VI shutoff.
